Having an in-unit washer and dryer is one of the most sought-after amenities for renters across nearly every major city in the United States. However, infrastructure limitations make installing traditional units difficult or even impossible in many buildings. This is part of our core value as a company. Solve a massive problem in the market and help the planet while doing it.
Lavli offes an innovative washer-dryer combo that recycles water after each wash, enabling installation where it was previously not feasible.
Lavli:
-
Plugs into a standard 110V outlet
-
Operates on a 15-amp breaker
-
Conserves water through a proprietary priority recycling system
-
Captures microfibers and microplastics before they re-enter waterways
-
Delivers more efficient drying with an advanced heat exchanger
-
Provides a seamless, operator-friendly experience
Maintenance
Your guide to maintaining the Lavli Machine
Email info@lavli.com
Average Response Time
24 hours
How to empty the purge tank?
How to empty the purge tank?
The purge tank is in the upper left corner of the machine and can be dislodged with a slight pull. Please note that you'll require to hold the tank with the handle up so water does not leak.
How do I clean the front filters?
How do I clean the front filters?
First, open the front panel. Please check the first filter (Spin Down Filter) that is located on the right side of the machine. Place the purge tank or another tank underneath spin down filter and turn the valve at the bottom. Water will come out therefore prepare for 1 gallons of water. To clean the screen unscrew housing by turning counter clockwise and remove the screen and scrap the lint and debris until you can see through the screen. When finished, place the screen back and screw back the housing. Make sure the valve is now closed on the bottom or water will leak out. To replace the filter located on the left, spin the housing counter clockwise. Please be aware that the housing will have grey water which may have an odor. Empty the water, throw away the cartridge and replace it. Screw the housing clockwise and ensure its snug tight.
How do I remove lint?
How do I remove lint?
Lint will remain in the front filter and will be cleaned when alerted. Typically once every week
Sustainability is not easy
It takes an innovative product to help drive sustainability across an entire industry. Water conservation is one of the most overlooked climates issues we face today. Many of our water sources are at critically low levels like the Colorado and Mississippi Rivers. 2023 was the driest year for rivers globally. Our mission is to help change the world one laundry load at a time.